Business Card Holder

Here's a quick and easy project for your office. It's a business card holder which can be made to hold as many or as few business cards as you like. This one has been made to hold 3 different cards, but it can be made for only one, by simply making it shorter.

Cut a strip of 1" hardwood about 1 1/2" wide - I used oak - and with a 1/2" bit, in 2 or 3 passes, rout a 1/2" deep channel about 1/8" in from one side. Then I rounded over the front edge for appearance, sanded it, and applied a stain, in this case Minwax Pickled Oak, and then a couple of coats of a satin topcoat.

And that's it! This is a good way to use up scraps, and it makes a great business card holder.

Email Webmaster
In an attempt to decrease the spam I get, my email address is
no longer clickable but instead is shown as an image in the box below.

If you wish to email me, please record the address below and email me there.